- The smaller bearing on the CMT Beading bits makes a delicate
inset at the base of the cut, giving you the advantage of an
extra decorative option. Simply change the bearing on your Roundover
bit to create a bead profile.
- always assemble the black
bearing heat shield with the raised side up when changing the
bearing. Improper assembly will cause the screw to come loose
and the bearing to fall off when working. All CMT Roundover Bits
have a 1/2" bearing diameter with the exception of the 1-1/8"
and the 1-1/4" bits which have a 3/4" bearing diameter.
You have 13 different radii to choose from , the majority with
2 shank diameter options. All bits are made of Fatigue Proof
steel and have carbide tipped cutting edges.