|
Special Deal!!
WE NEED
TO MOVE THIS PIECE OF EQUIPMENT
JET
GH-1640ZX Lathe with 2-axis ACU-RITE DRO 200S Installed
- New (demonstrated) floor model w/
2 yr factory warranty
-
7-1/2 HP, 230/460V, 3 Ph, Prewired 230V
MSRP $21,099.00
Asking
$16,999.00 but will
consider any reasonable offer
Crated and
ready to ship freight prepaid anywhere in the lower
48 states
(Forklift required
for unloading - this unit weighs 6000#s)
Phone:
1-800-841-1133
Jet 321475 Specifications:::
- Swing Over Bed (in.):
16
- Swing Over Cross Slide
(in.): 10
- Swing Through Gap (in.):
25-7/8
- Length of Gap (in.):
12-1/4
- Distance Between Centers
(in.): 40
- Spindle Bore (in.):
3-1/8
- Spindle Mount: Dl-8
- Spindle Taper (With sleeve):
MT-7 (MT-5)
- Number of Spindle Speeds:
12
- Range of Spindle Speeds
(RPM): 25-1,800
- Number of Longitudinal and
Cross Feeds: 122
- Range of Longitudinal Feeds
(in./rev.): 0.0015 to 0.0913
- Range of Cross Feeds
(in./rev.): 0.0006 to 0.0365
- Number of Inch Threads:
61
- Range of Inch Threads:
1-5/8 to 72
- Number of Metric Threads:
24
- Range of Metric Threads
(mm): 0.05 to 20
- Maximum Tool Size (in.):
1x1
- Maximum Compound Slide
Travel (in.): 5-1/8
- Maximum Cross Slide Travel
(in.): 9
- Maximum Carriage Travel
(in.): 35
- Tailstock Spindle Travel
(in.): 5
- Tailstock Taper:
MT-4
- Follow Rest Capacity (in.):
1/2 to 3-1/2
- Steady Rest Capacity (in.):
3/8 to 7
- Width of Bed (in.):
13-3/8
- Prewired: 230V
- Motor: 7-l/2HP,
3Ph, 230/460V, Prewired 230V
- Height: 48 inch
- Width: 40 inch
- Length: 97.5 inch
Jet 321475 230 V / 460 Volt Lathe
Includes:
- 10" 3 jaw chuck with top reversing
jaw
- 12" 4 jaw chuck
- 12" face plate
- Four-way tool post
- Follow rest
- Large capacity steady rest
- Fully integrated coolant system
- Full length splash guard and coolant
return
- Large easy to use foot brake
- Articulating halogen work lamp
- Centrally located controls with job
button
- Threading dial
- Mounting pads and levelers
- Spindle sleeve (MT-7 to MT-5)
- Dead center
- Live Center
|
Phone:
1-800-841-1133
|
