-
-
|
Reversing trigger speed control models
with Quick-Lock cord set.
For percussion carbide-bit drilling
in concrete and masonry, and drilling without hammering in wood
or metal. |
|
-
- 1/2" Magnum
Hammer-Drill
-
- For hole drilling
up to 1/2 inch the MILWAUKEE Magnum Hammer Drill is all the tool
you'll need. Lightweight, at 5-3/4 pounds, this tool is ideal
for use overhead. With two modes of operation, rotation with
hammering and rotation only, this versatile tool can be used
for drilling in steel, wood or concrete. Use Rotation Only for
drilling in steel and wood. Use Rotation with Hammering when
drilling in concrete. Dual Range Speed Control allows the operator
to choose higher speed with lower torque or slower speed and
more torque depending on the size and type of the fastener or
bit and the material being drilled. This tool can be used to
drive Concrete Screw Fasteners used in many installation operations.
The Magnum offers a unique Brush Cartridge System, storing spare
carbon brushes in the handle of the tool. Only a screwdriver
is needed to replace worn brushes. The tool is back on the job
in minutes. Equipped with an exclusive MILWAUKEE Quik-Lok Cord,
the cord can be removed for tangle free carrying and storage.
It also allows for fast field replacement of defective cordsets.
Simply twist and pull off the defective cord and push and twist
on the new cord. Includes Hammer Drill, Quik-Lok cord, side handle,
keyed chuck and depth gauge.
|
|
- Removable brush cartridge system
- Self-stopping brushes
- Heavy-duty industrial chuck
- 3-wire Quick-Lock cord set
- All ball and roller bearings
- Made in the U.S.A.
-
-
-
|
|
Model: |
5387-20 |
|
Volts, AC Only: |
120V |
|
AMPS: |
8.5 |
|
Speed: |
Low and High |
|
No Load RPM: |
0-1,000 & 0-2,500 rpm |
|
Blows per Minute: |
0-20,000 & 0-50,000 |
|
Steel Capacity: |
1/2" |
|
Concrete Capacity: |
5/8" (carbide tipped) |
|
Length: |
13" |
|
Shiping Weight: |
7 lbs |
|